Way To Use It
1.Install drivers for chips Qualcomm and QPST.2.7.437.msi
2. Decompress your row Frimeware ( ROM ) using 7-Zip.exe/Winrar to the root of any drive.
3. Check whether to install the necessary drivers.
Open the Device Manager on your PC, then turn off the device (smartphone or tablet) and take out the USB-cable from the device (if it was connected).
Then we press the Volume Up key (Volume Up) and holding it connect USB-cable which is already connected to the USB 2.0 port of your PC – in the Device Manager device should appear Qualcomm HS-USB QDLoader 9008
Then we press the Volume Up key (Volume Up) and holding it connect USB-cable which is already connected to the USB 2.0 port of your PC – in the Device Manager device should appear Qualcomm HS-USB QDLoader 9008
4. Run the utility QFIL (Start> All Programs> QPST> QFIL).
2. In the window QFIL fill in the following fields:
In the Programmer patch specify the path to the file prog_emmc_firehose_89XX.mbn ( in my case prog_emmc_firehose_8916.mbn ), for this click on Knop «Browse», in the window that opens, specify the path to the folder with the firmware ( in my case ROW_S121 ), then select the file prog_emmc_firehose_89XX. mbn and click “Open.”
Then click on the digging «Load XML …», in the window that opens, select one by one – first rawprogram0.xml and click “Open” and then patch0.xml and also click “Open.”
Then click on the digging «Load XML …», in the window that opens, select one by one – first rawprogram0.xml and click “Open” and then patch0.xml and also click “Open.”
5. Make sure that the program QFIL sees the device as Qualcomm Lenovo HS-USB QDLoader 9008.
4. Click on the button «Download» and wait for the end of the process.
The device should restart the process of filling in the successful firmware and boot into Android OS.
Ok, hopefully help you
Note You Are Using This Program At You Own Risk.
Downloading Links
________________
Post a Comment